The NBN fibre upgrade: who gets it, how it works, and the catch

Photo: Martin Tester via wikimedia (CC BY-SA 2.0)
Somewhere in the order of two million Australian premises were connected to the NBN through a copper line running from a node on the street corner. That was the compromise of the 2013 rebuild of the project, and for the better part of a decade it defined the argument about the network. The compromise is now being unwound, quietly, one lead-in at a time. NBN Co will run fibre all the way to most of those premises without charging for the build. The condition is that you order a fast plan and keep it.
I’ve watched the upgrade programme since it was announced, and I’ve had three people on my own street go through it, so this is a description of how it actually works rather than how the brochure says it works. They’re not the same document.
Who is eligible #
The programme covers premises currently served by fibre to the node (FTTN) and, in a separate stream, fibre to the curb (FTTC). NBN Co has been working through the FTTN footprint area by area, and its stated goal through the programme has been to give the large majority of the fixed-line footprint access to gigabit-class speeds by the end of 2025. The way to find out whether your address has been reached is not to ring your retailer. Type the address into the checker on NBN Co’s own site, which tells you the current technology and whether an upgrade is available.
Not every FTTN premises will be offered fibre. Some addresses were moved to fixed wireless during the earlier rebuild, and a portion of the copper footprint sits in areas where the economics of a fibre build are still being argued over inside the company. If the checker says your address isn’t eligible, it usually means “not yet” rather than “never”, but I’d treat any date a retailer gives you as an aspiration.

The condition: order a fast plan #
Here is the catch, and I’d rather state it plainly than bury it. The free upgrade is triggered by ordering a plan on the faster tiers, historically the 100 Mbps tier or above, through a participating retailer. Most retailers ask you to stay on that plan for a period after the fibre is connected. Twelve months is the figure I’ve seen most often, though the exact term is a retailer decision and it’s in the fine print of the offer, not in NBN Co’s rules. Drop below the qualifying tier inside that window and you may be charged for the build, or lose the discount the retailer used to make the plan attractive.
Whether that’s a good deal depends entirely on what you’d have bought anyway. If you were already paying for 100 Mbps on copper and getting 43 (a number I’ve seen on more than one node in Melbourne’s north), the upgrade is close to free money. If you’re a two-person household happily paying for 25 Mbps, the upgrade is a permanent increase in your bill in exchange for capacity you may never use, and the retailer’s enthusiasm is not evidence that you need it.
What the build involves #
Once the order is placed the job splits in two. The first part is a new lead-in: a fibre cable from the nearest pit in the street to a small box on the outside wall of the house, usually near where the copper phone line came in. On my street this was a single crew and a single morning, though one neighbour with a long driveway and a 1970s conduit that had collapsed took three visits. If the existing conduit is blocked, the crew will either dig or, more often, run a new one along the fence line, and this is the part of the process where you want to be at home and paying attention.
The second part is the internal connection: a new network termination device inside, powered from a wall socket, which replaces the old modem’s VDSL connection with an Ethernet port. Your existing router almost certainly works with it. The main thing that changes inside the house is that the wall socket you used for the copper line becomes decorative.
Between the order and the switch-on, the copper service keeps running. The cutover itself is typically a matter of hours, and the old line is disconnected afterwards. If you have a monitored alarm, a medical alert device or anything else that used the copper line, tell the retailer before the build, not after. Those devices are the single most common source of upgrade complaints I hear about, and they’re entirely avoidable.
What speeds you’ll actually see #
Fibre to the premises removes the distance-to-the-node problem that made FTTN speeds so variable. Since NBN Co’s September 2025 tier changes, the wholesale product that retailers sold as 100/20 became 500/50 on fibre, and the gigabit tiers moved up with it. In practice, the speed you see is then governed by two other things: how much capacity your retailer has provisioned, which the ACCC’s broadband performance monitoring programme measures, and the Wi-Fi inside your house, which is almost always the real bottleneck for the person who says “I upgraded to fibre and it’s no faster”. I’ve written about the second problem in a room-by-room guide and it’s the first thing I’d read after the crew leaves.
The FTTC stream is a different animal #
Fibre to the curb premises, where the fibre already runs to a distribution point in the pit outside and only the last few metres to the house are copper, sit in a separate stream of the programme. The build is smaller, since the fibre is already at the kerb, and the eligibility works the same way: order a qualifying plan, keep it for the term. If you’re on FTTC and your speeds have been fine, there’s less urgency. The short copper run doesn’t suffer the way a 700-metre node run does. The reliability argument still applies, though, and the reverse-powered distribution point unit that FTTC relies on is a component I’d happily see the back of.
HFC premises, the old Foxtel and Optus cable footprint, are not in either stream. NBN Co has upgraded that network in place, and the September 2025 speed tiers apply to it. Whether it ever gets replaced with fibre is a question for the next corporate plan, not this one.
Things that go wrong, and how to head them off #
From the three builds on my street and the several dozen I’ve heard about, the failures cluster in four places.
Blocked or missing conduit is the big one. Older houses, particularly anything pre-1980 with a phone line that was direct-buried, may have no usable path from the pit to the wall. The crew will propose a new route. Agree on it before they start, take a photo of where it goes, and make sure it doesn’t cross a spot you plan to dig up for a garden bed next spring.
Body corporate and strata premises are the second. A unit block needs the owners’ corporation to approve the lead-in and the internal cabling path, and that approval is a meeting, and the meeting is quarterly. If you live in a block, start that conversation before you place the order, not after the retailer has booked a crew.
The third is the legacy device problem I mentioned above. Alarm panels, lift phones, some older medical alarms and the occasional EFTPOS terminal in a home business all assumed a copper line. They will stop working at cutover. The ACMA has guidance on migrating priority assistance and medical alarm services, and the retailer is obliged to ask you about them. Answer honestly.
The fourth is expectation. A household that moves from a congested node to fibre and keeps the same five-year-old router in a cupboard under the stairs will get a marginally better result and a great deal of frustration. Budget for the router at the same time as the plan.
One more practical note. The order goes through the retailer, but the build is NBN Co’s, and when the two disagree about a missed appointment or a damaged driveway you will be talking to the retailer about a contractor it doesn’t employ. Keep the job number from the confirmation email. Keep the photos. If it drags past the service standard windows, the Telecommunications Industry Ombudsman handles exactly this class of complaint and is, in my experience, faster than most people expect. I’ve needed it once in twenty-two years, over a node build in 2017, and the matter was closed in nine days.
Should you do it #
My view, for what it’s worth, is yes for almost anyone on FTTN who can afford the qualifying plan, and the reason isn’t speed. It’s reliability. A copper lead-in that’s been in the ground since the Whitlam government fails in the rain, degrades in summer and is subject to a fault process that involves persuading a retailer to persuade NBN Co to send someone. Fibre doesn’t corrode. The upgrade is, in effect, the fixed-line network you were promised in 2009 arriving a decade and a half late, and it would be churlish to turn it down on principle.
Where I’d push back is on the twelve-month lock and the retailers’ habit of using it to push a 500 Mbps product on a household that streams one television. Check the tier. Check the term. Then let them dig up the driveway.
— Marcus Tully, Editor, Technology Spectator