Fix your Wi-Fi before you ring your ISP: a room-by-room approach

Photo: Nilo Velez via wordpress (CC0 1.0)
The router was in a cupboard under the stairs, behind the vacuum cleaner, on the floor, next to the electricity meter. The reader who wrote to me had rung her provider four times about slow internet, had the connection tested twice, and been told it was fine, which it was. The problem was eleven metres, two brick walls and a metal meter box. She moved the router to a shelf in the hallway, on my suggestion, and her speed in the back bedroom went up by a factor of six. That was the whole fix, and it’s the fix for most of the “slow internet” complaints that have reached me in two decades of covering this industry, from readers, friends and, repeatedly, my own parents.
First, find out which problem you have #
There are two networks in your house. There’s the connection from the street to your modem, which is the NBN’s job and your provider’s, and there’s the wireless network from your router to your devices, which is yours. They fail differently and they need different people to fix them, so the first job is working out which one is slow.
The test is simple. Plug a laptop directly into the router with an Ethernet cable, run a speed test, and write the number down. Then run the same test on Wi-Fi standing next to the router, and again in the room where it’s slow. If the cable number matches your plan and the Wi-Fi numbers fall off as you move away, the problem is inside the house and ringing your provider will waste an hour of your life. If the cable number is well below your plan, especially at night, that’s a provider or NBN issue, and my piece on what your NBN plan actually buys will tell you how to have that conversation. Most people skip this test, ring the provider, and get told it’s fine. It usually is.

Where the router lives #
Radio waves at Wi-Fi frequencies are absorbed by water, metal and dense masonry, and reflected by mirrors and metal-backed insulation. Your house is full of all of these. A router in a cupboard, behind a television, under a desk, next to a fish tank or beside the fridge is fighting its environment before it starts.
Put it high, central, and in the open. A shelf or the top of a bookcase in the middle of the house, ideally on the floor where the most devices are, beats any technical upgrade you can buy. If the NBN connection box is in an awkward corner, which it often is because the installer put it where the old phone line came in, run an Ethernet cable from there to a better spot for the router, or put the modem in the corner and the Wi-Fi router in the middle. Ten metres of cable costs less than lunch.
The two bands and why your phone picks the wrong one #
Modern routers broadcast on two frequency bands, and the newer ones on three. The 2.4 GHz band goes further and through walls better but is slow and crowded, since every microwave, baby monitor and neighbour’s router shares it. The 5 GHz band is much faster and much shorter-range. Wi-Fi 6E and Wi-Fi 7 routers add a 6 GHz band, which the ACMA opened up for use in Australia in 2022; it’s faster still, emptier, and shorter-range again.
Devices tend to cling to the band they connected on, which means a phone that joined 2.4 GHz in the back garden will stay on it in the lounge room, two metres from the router, getting a fraction of the speed available. Most routers can steer devices between bands automatically. Some do it well. If yours doesn’t, splitting the bands into two named networks and connecting the devices that stay put, the TV and the desktop, to the 5 GHz one by hand solves it permanently.
Channels and the neighbours #
In an apartment or a tight suburb you’re sharing the air with a dozen other routers, and if six of them are on the same channel everyone slows down. Routers pick a channel automatically at boot and rarely change it. Rebooting the router once in a while makes it pick again, which is the real reason “turn it off and on” works so often. A free Wi-Fi analyser app on a phone will show you which channels are crowded, and the router’s settings page will let you pick a quieter one. On 2.4 GHz there are only three that don’t overlap, 1, 6 and 11. On 5 GHz there are many more, which is another reason to be on it.
Mesh, extenders and when to spend money #
If moving the router and sorting the bands doesn’t get a usable signal to every room, you need more radios in the house, and there are two ways to do it. A cheap range extender repeats the signal and halves the speed while doing it; they’re the thing I’d take out of most houses. A mesh system, two or three units that talk to each other, does the same job properly, and in a large or double-brick house it’s the right answer. The best result of all is to connect the mesh units together with Ethernet, so the wireless is only doing the last hop to your devices, and if the house is being renovated, running cable to the far rooms is the cheapest upgrade you’ll ever make.
On what to buy: a current mid-range mesh kit from any of the major brands, not the cheapest and not the flagship. The flagship’s extra speed is above what your NBN plan can deliver anyway. The ACMA’s rules mean anything sold here legally is certified for the local bands, which matters because grey-import routers sometimes use channels that aren’t permitted in Australia and behave oddly with certified devices.
The devices that quietly eat the network #
A modern house has thirty or forty things on the Wi-Fi, and a handful of them cause most of the trouble. Old smart-home gear on 2.4 GHz that chatters constantly. A television that’s decided to download an update at 7pm. A laptop syncing a cloud backup of every photo it has ever seen. A games console pulling a 90-gigabyte patch. None of these are faults; they’re just traffic, and on a wireless network traffic from one device is time taken from another. Most decent routers will show you which device is using the connection, and a lot of “the internet is slow” turns out to be “the internet is being used, by the television, which nobody is watching”.
The fix is scheduling, not hardware. Backups overnight. Updates overnight. The console set to download when everyone’s asleep. It’s dull and it’s the difference between a household that argues about the Wi-Fi and one that doesn’t. The eSafety Commissioner’s guidance on managing devices at home is aimed at a different problem, but its advice on knowing what’s connected and when applies just as well to bandwidth as it does to bedtime.
The provider’s modem #
The modem-router your provider sent you is usually adequate and rarely good. It’s chosen for cost and for being easy to support over the phone, not for coverage. Using it as the modem and buying your own router or mesh for the wireless gets the best of both, and it’s what I do in my own place, where the provider’s modem lives in the meter cupboard and does nothing but be a modem. A quick opinion, since I’m allowed one: providers should be sending decent hardware by default, and the fact that most don’t, while charging what they charge, is the cheap-modem tax that nobody itemises.
One more thing about the provider’s hardware: the modem’s firmware is managed by the provider, remotely, and they update it when they choose. Your own router’s firmware is your job. Set it to update automatically, or check twice a year, because a router that hasn’t been patched since it left the factory is both slower than it should be and a good deal less secure than the rest of this article assumes.
The order to do things in #
Cable test first. Move the router second. Sort the bands third. Reboot for channels fourth. Mesh fifth, and only then. Ring the provider only when the cable test tells you to. In my experience that order fixes about four in five complaints before the phone comes out, and the fifth is a genuine line fault that the cable test proves in a way the provider can’t argue with.
I talked a mate through the under-stairs cupboard job again last month, over the phone, after he’d spent forty minutes on hold to his provider. The router is now on a shelf in the hall and the whole house works. He’s furious about the forty minutes and I dont blame him; the provider’s script should have started with “where is the router” and it started with “have you tried restarting it”, which is a different question and alot less useful.
— Marcus Tully, Editor, Technology Spectator